• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Properly Start a Wood Burning Stove

Wood stoves are a cozy method to heat a room and also save energy. However, they need an amount of care.

A majority of modern wood burning stoves wood stoves comply with EPA emission guidelines. Look for an EPA sticker either under or on the grate to make sure your stove won't produce many harmful pollutants.

How to start a Wood Fire

The smell and the sound of a fire can be a welcome addition in any house. However, it is important to know the correct method to create a fire on your stove. Incorrect techniques may lead to an unburned fire that doesn't burn well, and may produce smoke or creosote. The tips below will help you begin a fire that is safe and will heat up your home quickly and efficiently.

Before you start a fire, you should check the condition of your logs and coals. If they're too damp they will choke the flame and stop it from burning efficiently. It is possible to open the chimney to eliminate any ash that has fallen into the stove.

Start by placing a few small newspaper pieces that are dry and clean into your stove. This will help to ignite the tinder and kindling. Once they start to ignite, add a layer of larger pieces of kindling to the top of the pile. This should be done in a crosshatch fashion so that there will be air between each piece of portable outdoor wood burning stove (click the following post).

If your wood stove is equipped with an automatic combustion control, it will automatically pump air into the fire as it grows. This will enable the fire to burn at a steady pace without the need to open the stove door to tend it.

Be careful not to use too much tinder, as it will cause the fire to burn at an extremely fast rate and will not be able to use the fuel efficiently. When you have a good pile of tinder and some kindling in your stove, you can start the main fire by placing two large base logs across the grill. Then, on top of these base logs put a layer of wood perpendicular to them. This method of creating the fire is known as a "top-down" fire will result in a powerful and long-lasting fire that does not completely consume the larger base logs.

Close the damper when your fire has been established, and keep it closed. Opening the damper too soon could cause the fire to smother and will not allow for the proper air flow, which can reduce its efficiency.

Add Wood

Stoves aren't only beautiful pieces of home decor - they can help you save money by providing efficient wood heating. They can be used on their own or in conjunction with a furnace or central heating system to provide the additional heating required in large homes or homes with many rooms. A lot of the stoves that are clean burning available today utilize advanced combustion technology that can separate the burning volatile substances from combustible gasses and tar. This is accomplished by supplying air at two distinct stages. The first stage is to aid in the vaporization process, and the second step is to supply fresh air that has been pre-heated. This improves the process of combustion and helps to reduce odors.

The amount of heat that you get from your stove will depend on the type of wood and the amount of moisture in it, as well as the size of the logs. To let the wood dry, logs must be stored in a well ventilated location for a few months before burning. If the logs are not dry enough they will release lots of steam, which is essentially wasted energy.

During the burning of the fire, it is recommended to add more wood to the stack at intervals, not all at one time. Addition of too much wood at once can cause the temperature to rise within the firebox, creating a vortex which pulls smoke and volatile compounds that have not been burned back into the flames. This could reduce the efficiency of your stove.

It is recommended to stay clear of any other combustibles, like cardboard or paper in your stove, as they are not wood and have different physical properties that cannot be burned without creating dangerously high temperatures and excessive emissions. Also, avoid using compressed combustibles, such as wood briquettes as they have a very different chemical and physical properties from actual firewood and are not approved for use in wood burning stoves.

It is crucial that a professional install and test your wood burning stove. A certified WETT technician will test the installation to ensure proper operation and safety, as well as ensure that your chimney is operating correctly. They also provide maintenance services to keep your stove and chimney in top condition. They can check the accessible areas of your chimney for leakage, and repair any problems found. They will also make sure that the residents of the house know and follow the evacuation procedures for fire in the event of an emergency.

Adjusting the Damper

If you're not cooking on your stove, a damper regulates the amount of heat that is lost through the chimney. Additionally, it can help you control the fire. If the flue is open but the damper is not closed, the fire will not be able to burn as it should and smoke will pour into your home. To get the best fire with your damper adjusted properly you have to test different locations and observe how each affects the flames.

Typically, you should keep the damper open enough to let air flow in and out of the flue while the fire is burning. This allows the fire to start a fire and keeps it burning so that you can enjoy it for hours. The proper opening will keep the fire from being starved of air and will keep it from blowing out smoke.

In order to properly adjust your damper you need to first make sure the fireplace is heated and the wood stove is hot. This will ensure the chimney is warm and also that it has a strong draft. After these steps are completed, the damper on the wood stove can be adjusted.

After the fire has burned for a while, you should shut the damper around three quarters of the way. This will stop the warm room air from escaping through the chimney, while allowing smoke to escape from the wood stove.

This is the most effective way to keep the fire from getting too hot, while also keeping it burning. If you close the damper too far it could block the draft from working, however should it be too wide, a cold breeze could enter your home.

By placing your hands on the top of the flue pipe will show you how much the damper has sunk. If you can feel a small draft pushing on your hand it's probably in the open position.

The damper settings may differ from one stove to another and even among different types of wood burning fire. You can play around with different settings to get an idea of the ideal setting for your stove.

Clean up

After an incident, it is important to clean the stove and flue. This reduces the chance of a fire in the chimney which is the most common reason for fires caused by wood stoves. Creosote is a sticky substance that accumulates on the stovepipe's interior and can be extremely hazardous. Moisture and unburned particles of wood burners outdoor that are unable to escape the fire are responsible for this substance. This can also be caused when fires aren't properly lit.

Regular cleaning can help prevent creosote buildup. This can be accomplished by sweeping your chimney once every year. It is recommended to have your stove and fireplace professionally cleaned and inspected at least once per year.

It is also a good idea to clean the Ash tray and grate frequently. It is best to burn only wood burning stoves on sale that is well-seasoned since it will create less creosote. Avoid burning paper, cardboard and plastic. They can release chemicals that are dangerous for respiratory illnesses and the air, and could be released into your home.

The glass in the wood stove has to be cleaned regularly as well. Most newer wood stoves have self-cleaning windows, so they don't require as much cleaning. You can apply stove glass cleaners to the glass if you aren't getting the glass as clean as you would like on your wood stove.

Other helpful suggestions for maintaining your wood stove include turning the vent down when you are not using it, and opening a window or door to increase the flow of air. This will keep the fire burning more hot and more efficiently, since it won't have to be as active to circulate the air. It is a good idea not to stack logs, or place them on the fire for an extended time. This can cause warping and splits. It is advised to avoid using compressed combustible wood in your wood stove because the paraffin in the wood can melt and then flow into the flue and cause damage.