• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Maintaining Timber Windows

A well-maintained and maintained timber window is an important element of the historic structure of a building. It reflects in different degree the materials and techniques of the time period it was made, the craftsmanship and architectural taste.

If possible, repairs should be done in-situ. The repair system that is based on resin can be used to fix the most deteriorated areas without removing the whole window.

Durability

The windows made of wood in many historical structures were designed to last for hundreds of years. They do require some maintenance to keep them looking great. The most common maintenance tasks are repairs to sash-cords, re-tightening sash pulleys, and painting. The demand for upgrading timber windows to increase energy efficiency is also growing. This may include replacing old glazing units, repairing existing window rebates or installing new cills to increase the air seal.

One of the major issues with traditional windows is damage caused by corrosion of the paintwork. This is particularly important when windows with sash are involved since the gaps between sashes can be very large. In these situations, water can penetrate paint film and cause rotting of the wood or putty underneath. The rotting can be exacerbated due to weather conditions that are poor. To stop this from happening, windows need to be regularly painted with an exterior wood paint.

In addition to repainting, areas that have corroded should be repaired with the help of a resin-based repair solution. This will ensure the maximum amount of original fabric is retained. It is crucial to reduce the number of holes made into the frame in order to allow cable entry as these can admit moisture and cause decay.

Another major issue with older windows is the structural movement within the wall that can cause deformation of the frame and sash. This can result in sash not fitting correctly, jamming or sticking in the opening, or breaking glass repair cambridge. This can be corrected often by putting in new frames for sash made of slow-grown deal (pine) or oak. The cill should be made from a sturdy hardwood such as oak to avoid any movement between the existing and new work.

To reduce the risk to reduce the risk of this happening, there are several companies that manufacture Boston pattern sash made of wood that will fit most existing openings. These sash are available in a range of sizes and finishes to meet the needs of today's homeowner. The new sash, combined with quadruple draft strips and a better thermal insulation, can make a significant difference to the energy-efficiency of a home.

Aesthetics

A lot of old timber frames have a high aesthetic appeal, as they show, in some shape, the materials technology, the construction process, and the architectural taste from the time period they were made. They could have significant historical significance as a set. This is especially true for early unglazed upvc window lock repair openings in timber-framed buildings, where the great majority were just a collection of openings within the frame that were subdivided horizontally into mullions, and vertically into wood or iron bars to deter intrusions.

It is crucial to maintain the appearance of traditional timber window joinery. As soon as you see any signs of decay caused by water penetration, it is important to stop it. It is recommended to do this by thorough painting, particularly if there has been damage or degradation. It is best to use paints designed to be used in a system (primer undercoat and finish) and to follow the manufacturer’s recommendations for preparation and number of coats at each stage.

Wet rot is a frequent problem in old timber windows and the best way to stop it developing is to remove any damaged or rotten parts immediately to prevent the spread of the fungus that causes it. Replace rotting wood with slow-growing deal (pine) and, if possible, the same type of wood that is being removed to prevent differential movement.

Glass became less expensive and more abundant during the late medieval period and into the 17th century. In the process, glazed openings on timber-framed houses became more complex with moulded mullions, wooden tracery and deep cills projecting into the air. In recent times, glass repair cambridge was pinned into frames that were rebated using glazing sprigs, not lead cames. This method of glazing is not only less prone to leaking but it also allows more expansive, clearer sheets of glass to be used in windows than would otherwise have been possible without the need for lead lights.

Energy efficiency

Traditional timber windows are energy efficient because of their thickness and multilayer construction, as well as their care for detail. They also feature large glass areas and projecting cills that minimise air infiltration. With secondary glazing and draughtproofing, windows can be upgraded to increase their energy efficiency. However, it is important to keep in mind that these measures should be viewed in relation to the overall quality and appearance of the window in its original form.

As a result, retaining the existing windows from the past that are in need of repair instead of replacing them is sensible especially when their thermal improvements can be achieved economically through simple repairs and upgrades. Older windows are usually of historical value, as they reflect a variety of technological advancement and changes in architectural style. The pressure to replace these windows are generally based on the assumption that windows of the past will require replacement in the near future, however the majority of them are capable of serving for 150, 200 or even 250 years if properly maintained.

It is important to recognise that the decay issues that are that are typical of windows made of timber can be avoided by regular maintenance and timely repairs. It is also essential to identify damp problems and address them promptly so that you can avoid serious damage. Early paint deterioration is a concern because it allows moisture to get into the wood, causing wet rot. It is not uncommon for this issue to go unnoticed until the paintwork begins to crack or becomes wavy. However, it can cause structural damage and then further decay.

A good quality paint will stop this moisture penetration. It is also important to keep the paintwork clean in order to prevent mould and condensation. Modern synthetic paints pose a problem because they are water-resistant and can cause mildew growth within the window seal repairs frame.

The majority of windows from the past were manufactured from timber containing an extensive proportion of sapwood. These timbers can deteriorate quickly when exposed to rain, but they can be preserved with an extensive preservation treatment prior to use. It is also essential to ensure that the type of wood used is suitable to the site and climate conditions, since these factors will influence the durability of the joinery. Local window manufacturers provide a wide range of sash made from timber that can be customized to fit historic openings. They can be made according to the standard Boston pattern dimensions or to custom sizes that are in keeping with the architectural style of historic buildings.

Maintenance

The life of timber windows can be extended significantly through regular inspections as well as a careful redecoration and timely repair. The main cause of decay is the penetration of moisture through deteriorated paint and putty. This can be avoided by careful painting and the use of a good quality wood preservative.

Repairs to old sash windows and window frames made of casement should be handled with care and with minimal disruption. Repairs can be made to many traditional timber window designs without having to remove the frame. This should be done whenever possible. Paint that is peeling or loose should be removed carefully and sanded lightly to improve the 'key' of the surface and facilitate an easier adhesion of the new coating. It is important to avoid stripping old paint layers that may have historic value, and where these are present it is recommended that a study of the paint be carried out.

If a piece of timber has begun to decay, the best course of action is to take out the rotten material and replace it with spliced-in inserts that are shaped to fit the existing profiles. The inserted timber should also be treated using wood preservative and the junction between the masonry sub-cill and the timber cill should be sealed.

Replacement of traditional windows with PVC-u is an appealing option, particularly when the installer offers a "one-stop shop" installation that takes care of removal and replacement within the span of a day. However, it is essential that the person installing replacement windows has a complete knowledge of the construction and history of traditional wooden frames. This will enable them to make the right recommendations for energy-efficiency improvements and other technological improvements that don't affect the appearance of a historic building. awning window Repair replacements should be registered with a Competent Persons Scheme such as FENSA. This will ensure that the replacements are approved as a suitable solution under Building Regulations. It is certainly possible for an experienced and skilled carpenter to install PVC-u windows that fit the character of the original building. This is especially true where windows are installed in listed buildings or conservation areas.