• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can save homeowners money and make their homes comfortable. Window replacements may be required in the event of severe damage like broken glass or a shattered window frame.

But there are many other issues that can be fixed to prolong the lifespan of your windows. Some common issues include:

Broken or cracked Panes

It's a rock that's been thrown by your lawnmower or a tree branch blown by strong winds, cracked window glass is not only ugly, but it can also result in more expensive electricity bills because the broken pieces allow cold air to enter your home. It's relatively easy to repair windows that have broken panes.

Start by carefully removing the glass using gloves and glasses. You may need to use a utility knife to break loose the old glazing compound or putty around the frame's edges. Then, clean the surface of the glass and the wood of the frame with a soft cloth or paper towel.

After the area is cleaned, apply a waterproof silicone caulking on the perimeter of the frame. This will stop water from entering the frame through the crack and causing further damage.

A crack that is severe in double-paned glass may compromise the gas between the panes, rendering your windows less efficient in insulating. If the crack is severe enough that it threatens the integrity of the window or if the pane inside is not there it is possible to consult an expert.

Thermal stress cracks can also occur when there's an extreme difference in temperature between the outside and inside of your home, which causes the glass to expand or contract. If the cracks are situated on two sides of a window it is recommended to replace it rather than try to repair it.

Clear tape can be used to seal cracks in windows that aren't yet ready for replacement. It will also keep out cold winds and bugs. You can also cut an amount of nylon stocking big enough to cover the entire crack and glue it with duct tape. This isn't a permanent solution, but it works well in a pinch and it keeps insects and cold air out of your home. If your windows are old and you're starting to notice cracks in the glass, it's recommended to consult with your local window company about whether replacing the entire window might be the best solution for you.

Rotten Wood

Wood rot is among the most frequent problems that plague windows. It can affect the appearance of a house and also pose an hazard to safety. It is, however, possible to repair rotted wood. You will first need to determine the root of the wood's decay. Examine for leaks in the roof and other places where water could get into the wood.

You will then need to remove the rotten parts of the window frame. This can be done using a rasp, chisel or claw hammer. After the areas that are rotten have been removed it is time to replace them with new wood. Pre-treated wood is suggested for this task, since it will resist the onset of rot. If you are unable replace the wood that has been damaged, you can try using filler or wood hardener to repair the damaged area. Most hardware stores will sell this kind of product. Follow the instructions on the label of the product to achieve the most efficient results.

After you have repaired the damaged areas of the window sill, it is essential to safeguard the area. Apply a water-resistant sealant the wood. Sikkens, for example, is a great product to use.

Make use of a two-part epoxy to safeguard the wood from further damage. This product is easy-to-apply and leaves a nice finish. However, it is very important to follow the directions for application on the label. Once the epoxy filler has dried, you can sand the surface of the wood. It is best to begin with a rough grade of sandpaper before moving to a smoother grade.

You do not want to expose the damaged part to further moisture. It is therefore a good idea to cover the repaired area with an oil-based primer that will help protect it from moisture. After that, you can apply the wood sealant, which is waterproof.

Won't Open

A window that isn't opening can be caused by a variety of reasons. The house could have settled, or the wood frames may have warped in rainy weather. There is also the possibility that someone put them in place to protect themselves. With a little patience and the right tools, you can open most stuck windows.

One of the most frequent causes of a window that won't open is accumulated debris or gunk on its moving parts. Acme Glass notes that dirt and grime build up over time on sliding tracks, hinges, and locks. Metal hardware may also rust if it comes into contact humidity and direct sunlight. Spray grease on these areas will aid in preventing oxidation and help keep your windows operating properly.

The pulleys that raise or lower the window repair could be loosened, or break. These parts can lose their tension and become obstructed especially when the window is at least two stories above the ground.

If you have trouble opening a door, you can use a pry-bar to gently open the window. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to damage either the wood or the window repair near me. You can also try running a hair dryer across the edges of the frame for a few minutes to warm the wood and assist it to move more easily.

A faulty spring can also be the cause of a window that won't raise or lower. You'll need to check the owner's manual for more details based on the manufacturer of your windows.

If you've tried cleaning and lubricating the moving parts on your windows, but they still cannot open, it may be time to replace the windows. Homespire Windows & Doors offers windows that are energy efficient. Don't let your windows go from functional to useless, as windows that aren't properly closed can leave your home vulnerable to water damage and burglary. Contact our team for more information about our windows replacement and services today!