• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. They don't decay or rust as aluminum and timber.

It is important to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary door repair costs as well as improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good repair.

For single pane windows, it is fairly easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the old panes. In this case, you will need to find some plastic spacers to aid the new pane in being able to fit perfectly into the frame of the window.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass to ensure that any shards fall on the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will prevent drafts and water from entering your home until a professional arrives to repair the window. This also serves as an obstacle to stop intruders from making their way into your home. If the distance between the door repairing and the window is large, you might want to use a security screen that also has a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they may be afflicted by a variety of problems including sagging. A sagging window in uPVC can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from becoming worse.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows to reach the frame. With an screwdriver, unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit, tighten the screws to ensure they remain in place.

If you can't reposition the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Most often this is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has worn out. Luckily, it's not difficult to fix a loose uPVC window handle yourself. First, you'll need close the window and perform an experiment fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it is important that you take action. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature in your home. The most common reason for leaking upvc window repair (click to find out more) windows is that the sealant surrounding the frame is damaged or missing.

This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the problem the caulking that was used up might need to be removed before a fresh layer can be applied. It is important to keep in mind that when it is about upvc repairs window repairs you should not be tempted to apply too much caulk and then make the area more difficult to clean and can decrease the efficiency of your energy usage.

Check that any drainage holes have no debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious cases, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to remember that if the leak originates from the glass of your double-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. Again this can easily be repaired by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it blows open with a breeze. They can be replaced by any competent DIYer and can usually be completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. It's very simple to change the hinges on a window but it's much simpler if you have someone to help you to hold the frame.

Make sure that the uPVC hinges are open and closed in the proper direction. Check for the arrows on each hinge to determine which way the window should be opened.

The problem can be caused by opening the window incorrectly or by a poor installation at the factory. This can often be resolved by sending us a photograph via our website and we will be pleased to offer you suggestions.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different factors. The hinges, also due to wear and tear may become displaced, which causes an opening to appear where the sash meets the frame. If they are damaged beyond repair, it could be necessary to have them realigned. The second is the interlock, which is located on the hinge side of the window, may be misaligned. Again, it may be feasible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

The next common reason for draughts are the window seals. These can become worn down or damaged over time, and allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will reduce the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be hung over your window sill. These will help to block out cold air and keep your home warm and cozy!

With a little regular maintenance and repairs, your upvc windows will provide an excellent level of insulation and security for your home. It is important to remember that all windows eventually get worn out and it is more cost-effective to simply replace them rather than repair them. So, if you are having issues with your upvc windows, it is best to seek professional assistance immediately.