• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft by using the Ghost Immobiliser. It's discreet and does not require any additional key fobs.

The device utilizes buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence that can be up to 20 presses. This will then allow your vehicle to start.

Simple PIN Code Change Process

Many owners are upgrading their security because of the rise in vehicle theft. There are many kinds of security gadgets that are sold aftermarket, from tracking systems to alarms and immobilisers. Not all of them are equally effective at protecting your car. While a tracking system may assist you in locating your vehicle in the event of theft, it can not stop the crime from occurring in the first in the first place. An immobiliser, on the other hand, does exactly what it says on the tin: it shuts down the engine of your vehicle so that it cannot be started. The Autowatch ghost immobiliser and tracker is one of the most sophisticated options available, making it virtually impossible for thieves to steal your car.

The ghost device makes use of the buttons on your car to create a unique sequence that must be entered to allow the engine to start. This can be accomplished using the indicator stalk, window or heater buttons. In addition to this it is possible to use a mobile app which acts as an emergency PIN code override and allows the driver to operate the car without having to use the button sequence. This option is particularly useful if you need to surrender your car for valet parking or maintenance, as the immobiliser will remain activated, but not disabled.

The Ghost is an unique and innovative device that operates with the buttons on your vehicle rather than as a standalone device. This means that it is not just a highly effective deterrent against vehicle theft but also a transferable device onto any other vehicles you own, making it more of an investment than traditional steering wheel locks.

Small device that is weatherproof

The Autowatch Ghost Immobiliser is a sophisticated security system that safeguards your pride & joy from key hacking and cloning. It also blocks ECU swapping. It's a weatherproof, tiny device that connects directly to your vehicle's ECU via the CAN data bus to disable the engine. It can be installed in the vehicle without the need for extra wiring and has been thoroughly tested to ensure that it works with all vehicles. It also is resistant to jamming devices, which are a common technique used by thieves to circumvent immobilisers.

The advantage of CAN data over traditional systems is that they operate in a silent manner. It isn't detected by sophisticated RF scanning and code-grabbing technology, nor can it be recognized by conventional diagnostic tools. The Autowatch Ghost does not employ LED indicators, but instead uses buttons on your vehicle, such as the steering wheel, the centre console, or doors, to create an unique sequence of disarming. This sequence can be extended by 20 presses to provide additional security. The iPhone app is limited to one connection, and comes with the Ghost's unique pairing code. the Ghost. All communication between the two devices is secured.

The Ghost prevents car thieves adding a new ignition key or replacing the ECU to bypass the immobiliser. The engine will only start when a valid PIN code is entered. It is able to be operated temporarily in the Valet/Service mode (with the appropriate parameters, like 30mph speed limit) which means you can offer your vehicle to a valet or service without having to enter an entry code.

Tested for each vehicle

The Autowatch ferrari ghost installer is the world's first aftermarket immobiliser for CAN bus that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device is able to intercept signals and prevent your car from starting normally until you enter a custom code. The system can be activated and deactivated through your smartphone's application without the need for additional wires.

The factory-installed immobilisers function by using a transponder that is built into the key. This transmits a signal to the ECU. If the correct code is transmitted the car will begin however, if the transponder is replaced by one from a different vehicle, the immobiliser won't recognize it. This allows the vehicle be stolen and started. The Ghost immobiliser was created by an South African company at the top of security systems for vehicles technology. It guards you against key cloning or hacking, and even key theft. Only by physically towing your vehicle away could a thief get it and not be able drive it.

ghost installers near me makes use of buttons in your vehicle, such as the indicator stalk, steering wheel, as well as the door panels, to create an individual PIN code that must be entered in order to use your vehicle. This is not required to use additional hardware, such as a key-fob and can be as long as 20 presses long. It is also unrecognizable by devices for diagnosis and transmits radio frequency signals, meaning thieves are not able to use sophisticated RF scanners or code grabbing techniques to determine if the system has been set up.

Ghost is more difficult to remove than car alarms that require disarming by pressing several buttons. This makes it a fantastic complement to a GPS tracking device, which can be used to track your vehicle after it's been taken.

Emergency PIN code override

You don't have to look very far on social media for stories or videos about cars that have been stolen with the most advanced technology tools. This includes key-cloning devices and hacking tools that allow thieves to start the car without the original keys.

The Ghost immobiliser was specifically designed to prevent this and provide you with an extra layer of security in order to protect your vehicle from being targeted by thieves. It generates an individual pin code by pushing the buttons on your steering wheel, door panel and the centre console. This unique PIN is entered alongside the original key fob to stop the engine from beginning. The unique override pin can be located on a black card that you will receive after your installation. It is easy to remember since there are no LED indicators.

The device is hidden in the vehicle's wiring and doesn't emit any radio signals, which means it cannot be recognized by criminals using diagnostic software that can recognise what type of security system you have installed. This makes it an excellent alternative to an alarm.

Contrary to most security systems that have an engine relay bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependent). This enables them to shut down the vehicle completely through an electronic block of commands that is sent to both the ECU and the engine.

They can also be linked to a separate analogue alarm, immobiliser or tracker. This should be decided prior to the installation. They are also fully service/valet mode compatible and a good alternative to a tracker you are taking your car in for repairs to an electrical issue at the dealer.

Service/Valet mode

In recent years there has been an increase in the number of vehicles being stolen with no owner's keys. With the ease of access to key cloning tools and door lock pick sets, it is now easier than ever for thieves to steal your joy and pride. To prevent this from happening, we have launched the Autowatch Ford focus ghost installer (Te.legra.ph) immobiliser that prevents your vehicle from being driven even if your keys have been copied or your car ghost immobiliser has been stolen.

It connects directly to your car's ECU (Engine Control Unit), via the CAN data loop. It's completely silent since it doesn't use radio frequency or keys fobs. It cannot be detected using diagnostics or any other hacking device. It also protects the user from using an ECU or key to bypass the system, because only the PIN number allows the engine to be started.

The device is hidden inside your car and can be reached via the buttons on your steering wheel, center console and door panels. Before you can start your vehicle, you must enter a unique and changeable PIN number that is up to 20 digits.

This is the first aftermarket CAN-bus immobiliser for the market that was designed. It will stop your vehicle from being driven or even started when you don't enter a PIN number first. If you are driving away with the device arming the indicator will flash on your dashboard that will flash continuously for around 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to run just as normal. If you do not enter your PIN code at this point, the indicator will continue to flash and will require a new PIN code every attempt to start your car.