• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Properly Start a Wood Burning Stove

Wood stoves are a warm method to heat a room and save energy. They do require some maintenance.

Many modern wood stoves conform to EPA emission guidelines. Look for an EPA sticker either under or on the grate, to ensure that your stove won't produce many harmful pollutants.

How to Start a Wood Fire

The smell and sound of a woodfire can be an enjoyable addition to any home. But it's important to learn the proper way to make a fire on your stove. Unintentional methods can lead to the fire not to burn efficiently, and produces smoke or creosote. The tips below will help you start a fire that will heat your home with minimum effort and maximum safety.

Before you start a fire, you should check the condition of your logs and coals. If they are wet it will dampen your fire and hinder proper burning. You might want to open the chimney to remove any ash that has fallen into the stove.

Begin by placing several small wood burning stove indoor newspaper pieces that are dry in the stove. This will help to ignite the sparks. Once the tinder and kindling have started to ignite, you can add a layer of larger kindling pieces on top. This should be done in a crosshatch pattern so there is air between each piece of wood.

If your wood stove has an automatic control for combustion, it will automatically pump air into the fire as it grows. This will allow the fire to burn steadily without the need to open the door of your stove frequently to check on it.

It is important to not use too much tinder, as it can cause an unburned fire that burns at a high rate and doesn't make use of the fuel as efficiently as possible. After you've built a solid foundation in your stove that is made of sparks, tinder and kindling, start the main flame by laying two large base logs on the grate. Then, add small logs parallel to these and on the top of the base logs. This "top-down" method of building a fireplace will produce a long-lasting, efficient fire that doesn't completely engulf larger base logs.

Close the damper once your fire is established, and keep it shut. Doing this too soon can cause the fire to be smothered, and it will not allow for the correct air flow, which can lower the effectiveness of the fire.

Adding Wood

Stoves aren't just beautiful home décor pieces They can also help you save money by providing efficient wood heating. They can be used by themselves or together with central heating or furnace system to provide the supplemental heat required in large houses or homes with multiple rooms. A lot of the stoves that burn cleanly available today utilize advanced combustion principles that can separate the burning volatile substances from combustible gases and tar. This is done by supplying air at two distinct stages. The first stage is to aid in the vaporization and the second step is to provide fresh air that has been pre-heated. This improves the combustion process and helps to reduce the smell.

The amount of heat you will get from your stove will depend on the kind of wood used and the amount of moisture in it as well as the size of the logs. The logs must be stored in a well-ventilated space for several months before you attempt to burn them, to allow the wood to dry. If the logs are soaked with too much moisture, they will produce steam which is essentially wasted energy.

When you are burning the fire, you should add more wood to the stack in intervals, but not all at once. In addition, adding too much wood at once causes the temperature inside the firebox to rise, and produces a vortex that sucks smoke and unburnt volatile compounds back into the flame, which can reduce your stove's efficiency.

Avoid burning other combustibles in your stove such as paper or cardboard because they are not cheap wood burner. They have different physical properties and can't be burned without creating dangerously high temperatures. It is not recommended to burn combustibles that are compressed, such as wood briquettes as they differ in physical and chemical composition from firewood. They are also not approved to be used in wood-burning stoves.

It is essential that a professional install and test your cheap wood burner stove. A certified WETT technician will test your stove to ensure it is safe and functional. They will also check that your chimney works correctly. These professionals can also offer maintenance services to keep your chimney and stove in tip-top shape. They can check for leaks in the areas that are accessible to your chimney and repair any issues they discover. They will also ensure that the occupants of your home understand and comply with the evacuation procedures for fire in the event of an emergency.

Adjusting the Damper

A damper controls how much heat is lost to the chimney when you're not using your stove. In addition to this it can also help you to control the flame. If the flue is not open but the damper is closed too much the fire won't be able to burn properly and will release smoke into your living space. You can adjust your damper to get the Best contemporary wood burning Stoves flames by experimenting with different positions.

Typically, you'll want to keep the damper open enough to let air flow in and out of the flue while a fire is burning. This will allow the fire to start and stay lit for several hours. The right opening will prevent the fire from being deprived of air and stop it from blowing smoke.

To adjust your damper properly it is important to first make sure that the fireplace is preheated and the wood stove is hot. This will ensure the chimney is warm and also that it has a good draft. Once this is accomplished the damper on the wood stove can be adjusted.

Once the fire has smolder for a while, you can close the damper to about three-quarters of its original position. This will prevent warm air in the room from venturing into the chimney, but still allowing smoke to escape.

This is the best way to prevent the fire from becoming too hot while still keeping it lit. The draft could be stopped if you close the damper too tightly however a cold breeze could enter your home when the damper is not closed.

By placing your hands on the top of the flue pipe will inform you how much the damper has opened. If you feel a slight draft pushing on your hand it's likely to be in the open position.

The damper settings can differ from one stove to another and even among different types of wood. You can experiment with different settings to get an idea of the most suitable setting for your stove.

Clean up

After the fire, it's essential to clean the stove and flue. This reduces the chance of an explosion in the chimney which is the most common reason for fires caused by wood stoves. Creosote is a sticky substance that builds up on the stovepipe's interior and can be extremely hazardous. It is caused by the moisture and wood particles that are not burned that are unable to escape the fire. This can also occur by fires that are not properly lit.

Regular cleaning helps keep away the buildup of creosote. This can be done by sweeping your chimney at least once every year. It is also recommended that you have your fireplace and stove professionally cleaned and examined at least yearly.

It is also a good idea to clean the ash tray and grate regularly. It is recommended to only use seasoned wood for burning, as it will create less creosote and ash. Avoid burning paper, cardboard and plastic. They can release chemicals that are dangerous for respiratory illnesses and the air, and could be released into your home.

The glass that is used on the wood burner stoves burning stove has to be cleaned frequently too. A lot of modern wood stoves have self-cleaning glass, which means they do not require any cleaning. You can use stove glass cleaners on the window if you're not able get the glass as clean as you want on your wood stove.

Other helpful tips to maintain your wood stove are to turn the vent down when you're not using it and cracking windows or doors to increase the flow of air. This will keep the fire burning more hot and more efficiently, since it will not need to work as hard to circulate air. It is also a good idea to not stack logs or place them in the fire for long durations of time, since this could cause warping and splitting. It is also recommended to not use compressed combustible logs in your wood stove because the paraffin they contain can melt and flow down into the flue, which could damage it.