• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they generally fit into old frames very easily. However, if you have double glazed window repairs-pane windows that are held in place by internal beading it will be more difficult to get rid of the existing panes and install new ones. In this situation, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass to ensure that any shards will fall on the fabric rather than on the floor where they can be trodden under and cause further damage.

It's a great idea seal the gap after the glass is removed. This will stop water and drafts from entering your property until a professional arrives to fix the window. It also acts as a barrier, deterring any intruders from gaining entry to your home. If the distance between the window and the door is significant, you may prefer security screens that has windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a number of problems such as sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need open the window to access the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to hold them in place.

If you can't reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to loosen. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and safe from drafts.

uPVC handles may also become loose. This is typically caused by screws that have been removed over time, but it can be due to the mechanism of the handle wearing out. Fortunately, it's easy to fix a loose upvc window repair near me window handle yourself. First, you'll need to shut the window and do a test fitting. The corners of the sash must align with the casing joint. If it isn't then you can make use of a screwdriver to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any competent DIYer. Depending on the severity of the issue is, the old caulking might need to be removed. It is important to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk and then make the area more difficult to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes have no debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. This can be easily repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with a breeze it could be hinges that are at the fault. They can be easily repaired by any DIYer who is skilled and can be completed in just a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that have hinges and like any mechanical part they will wear out over time. Changing a window hinge is an easy process, but it's easier to do when you have a person to help you hold the frame up.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. You can check this by looking for the arrow on each hinge, this indicates which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain manner or because of poor installation at the factory. This issue can be fixed by sending us a photograph on our website. We will be pleased to offer you suggestions.

Regular lubrication of the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It can also lower the risk of a window getting stuck and stop corrosion. This is recommended to be done at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your upvc window repairs window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. First, the hinges due to wear and tear may become displaced, which will cause a gap to form where the sash meets the frame. If they are damaged beyond repair, it could be required to realign them. Secondly the interlock, this is on the hinge side of the window and can also become misaligned, again it may be feasible to give them a clean but in some cases it might be necessary to have these replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. which will help regulate indoor temperatures, and also reduce the risk of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They can keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs windows made of upvc will continue to provide an excellent level of insulation and security for your home. However, it is important to realize that all windows have a lifespan and they may reach an point at which it is more cost-effective to replace them rather than repair them. If you are experiencing problems with your upvc windows, it's recommended to seek assistance from a professional as soon as possible.