• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Properly Start a Wood Burning Stove

Wood stoves are an ideal way to save energy and heat rooms. However, they require an amount of care.

A majority of modern wood stoves comply with EPA emission guidelines. Look for an EPA sticker under or beside the grate to ensure your stove doesn't generate many harmful pollutants.

How to start a Wood Fire

The scent and sound of a small shed wood stove fire can be a wonderful addition to any home. It's important to know how to create an effective fire on your stove. Improper techniques can result in the fire not burning effectively and can cause creosote or smoke. The following tips can help you start an fire that can heat your home with the least effort and ensure your safety.

Before you begin a fire, you should check the condition of your coals and logs. If they're wet they will choke your fire and prevent the proper burning. It is possible to open the chimney to eliminate any ash that has fallen into the stove.

Begin by placing a handful of small corner wood burning stove dry newspaper pieces in your stove. This will help ignite the tinder. Once they start to burn, add another layer of larger pieces of tinder to the top of the pile. This should be done in a crosshatch pattern so there is air between each piece of wood.

If your wood stove comes with an automatic combustion control, it will automatically feed air to the fire as it grows. This will help the fire to burn at a steady pace without having to constantly open the stove's doors to tend it.

Do not use too much tinder as it will cause the fire to burn at a fast rate and will not be able to use the fuel effectively. When you have a good fire and a bed of tinder in your stove, begin the main fire by placing two large wood burner base logs across the grill. On the top of these base woods lay a layer parallel to them. This method of building an ember known as a "top-down" fire can result in a successful and long-lasting fire that does not completely consume the larger base logs.

Close the damper after your fire is established, and keep it closed. If you open the damper too early, it could cause the fire to get smothered and not allow for the correct air flow, which can reduce its efficiency.

Adding Wood

Stoves can be used to heat your home efficiently and save you money. They can be used by themselves or in conjunction with central heating or a furnace system to provide the extra heating required in large homes or homes with multiple rooms. A lot of the stoves that are clean burning available use advanced combustion principles that separates the burning volatile compounds from combustible gases and tar. This is accomplished by providing air at two different stages. The first stage permits the vaporization of the volatile compounds and the second stage offers fresh air that is pre-heated. This enhances the combustion process and reduces the odors.

The amount of heat that you can get from your stove will depend on the type of wood and the amount of moisture in it, as well as the size of the logs. To let the wood dry, the logs should be stored in a ventilated location for a few months prior to burning. If the logs are too wet they will create a lot of steam that is in essence wasted energy.

While you're burning the fire, you should add more wood to the stack in intervals, not all at all at. In addition, adding too much wood at once causes the temperature in the firebox to increase and produces a vortex that sucks smoke and unburnt volatile compounds back into the flame which could reduce your stove's efficiency.

It is recommended to stay clear of other combustibles like cardboard or paper in your stove, because they are not wood and possess different physical properties and cannot be burned without causing dangerously high temperatures and excessive emissions. It is not recommended to burn compressed combustibles like wood briquettes because they are different in physical and chemical composition from firewood. They are also not type-approved to be burned in wood-burning stoves.

If you are installing wood-burning stoves into your home, it is essential to have it installed and tested by a professional. A certified WETT technician can examine your stove to make sure it is safe and reliable. They will also check that your chimney is functioning properly. They also provide maintenance services to keep your chimney and stove in top condition. They can check the areas that are accessible to your chimney for leaks, and fix any issues that are found. They will also make sure that all house occupants are aware of and adhere to the fire evacuation guidelines in the event of an emergency.

Adjusting the Damper

When you're not making use of your stove, a damper can control how much heat is lost through the chimney. In addition, it can also help you to control the flame. If the flue opens, but the damper is not closed the fire will not ignite properly and smoke will pour into your home. You can adjust the damper to ensure the best flames by experimenting with different positions.

You want to keep your damper open to let air be able to enter and exit the flue when a flame is burning. This will let the fire start and remain lit for a number of hours. The proper opening will stop the fire from becoming starved of air and prevent it from blowing out smoke.

To adjust your damper correctly, you must first ensure that the fireplace has been preheated and that the wood stove is hot. This will ensure that the chimney stays warm and has good draft. After these steps are completed, the wood stove damper can be adjusted.

After the fire has burned for some time, you need to shut the damper around three quarters of the way. This will stop the warm air in the room from venting through the chimney, while allowing smoke to escape from the wood stove.

This is the best method to stop the fire from getting too hot, while also keeping it burning. The draft may be stopped if you close the damper to far however a cold breeze can enter your home when the damper is left open.

You can test how much the damper is opened by holding your hand near the top of the inside of the flue pipe. If you feel a small wood burning stoves for shed draft pressing against your hand, it's probably in the open position.

The damper settings may differ from one stove to the next and even among different types of wood. You can experiment with different settings to get a sense of the most suitable setting for your stove.

Clean Up

It is essential to clean your flue and stove after the start of a fire. This can reduce the chance of a fire in the chimney, which is the primary cause of fires caused by wood stoves. Creosote is a sticky substance which can build up within the stovepipe, can be extremely dangerous. It is caused by the moisture and shed wood burning stove particles that are not burned that are unable to escape the fire. It can also be caused by improperly lit fires.

A regular cleaning routine helps prevent the buildup of creosote. The best way to do this is to sweep the chimney every year. It is also recommended that you get your stove and fireplace professionally cleaned and inspected at least once a year.

Also, it is an excellent idea to clean the ash tray and the grates regularly. It is a good idea to only use seasoned wood for burning, as this will produce less creosote as well as ash. Avoid burning paper, cardboard and plastic. They could release chemicals that can be dangerous for the respiratory tract and the air, and could be released into your home.

It is also important to wash the glass of the wood stove on a regular basis. Many newer wood stoves have self-cleaning glass, which means they do not require much scrubbing. If you're not able to make the glass on your wood stove as clean as you would like There are stove glass cleaners that can be used on the window.

Some other helpful tips to maintain your wood stove are to turn the vent down when you are not using it and cracking the door or window to increase the flow of air. This will keep the fire burning hotter, and more efficiently. The wood stove will not need to be as active to circulate air. It is recommended not to stack logs or leave them on the fire for an extended period of time. This can lead to splits and warping. In addition, it is best wood burner stoves to avoid using compressed combustible logs in your wood stove because the paraffin they contain could melt and spill into the flue which could damage it.