• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Locked Keys in Car? Here's How to Open Your Car Without Damage

If you've locked your keys in your car, don't be afraid. There are a variety of techniques you can try prior to calling a locksmith or roadside assistance service.

For example, you can make use of a shoelace that has a slip knot to tie up the post lock, or a wire coat hanger that you untwist and mold into hook. You can also make use of a door wedge or an inflatable wedge.

Pump Wedge

Call a professional if you are stuck in your car and DIY methods such as shoestrings or wire hooks or wedges don't work. A locksmith or repo service provider might have lockout tools that can help you unlock your vehicle without causing damage.

Make sure you use them correctly when they are available. Know where to insert the wedge tool. Many people mistakenly put the wedge in the top corner of the door, which is where it is most vulnerable to damage. This is not a good idea, since you are likely to damage the weather stripping or the wires within the door. Instead, put the wedge in the biggest portion of the gap that is visible and where it will have maximum leverage.

The Pump Wedge is a top-quality inflatable wedge made of heavy duty non-marring vinyl. It is able to slide between the vehicle's door and door frame, and is then inflated to create a separation. This will allow you slide in other tools like an opening tool for cars with a long reach rod. It has a hook on one end that you could shape in order to grab the latch on the door handle.

A more economical alternative is a pair of wooden door stops. You can use them to pry open a car the gap at the back of the door. You can also try a slim jim which is a thin metal strip that can be bent into a hook that can be used to latch to the lock and then pull it up. This method requires practice however, as you need to be careful not to damage the weather stripping on the door.

Another alternative is to use a shoelace however, this is only applicable to older vehicles that do not have a push-button unlocking mechanism. You can tie a slip knot in the middle of the lace and then move it upwards and downwards through the door's seam until you find the latch. After that, maneuver the lace until it is in contact with the lock, then tighten the slip knot, and pull it upwards. This method can be more difficult than the other and can scratch the paint or damage the door trim if you aren't careful.

Inflatable Wedge

You can easily unlock your car using an inflatable wedge-shaped door opener. This will save you from using prying tools or slim jims. These car door wedges can be inserted between the window and the frame of the vehicle, and when inflated they create a space large enough to insert a long-reach tool such as an a-slim jim or button grabber. This method is less dangerous than using tools to pry and is a good option if you do not have an screwdriver.

A coat hanger made of wire that is shaped into a hook is an additional method to unlock a car without damaging the exterior or interior. This can be used to grasp the lock and may be more effective than a flat screwdriver as it is less likely to cause damage to the paint of the vehicle. However, you must check all of the doors to make sure there isn't another way to gain access.

You could also try an old plastic bag that has been twisted into a noose-like or v-shaped shape, but you will need to be careful not to tear it, because it could make your situation worse. This technique is especially helpful if you can't find the lock button. This trick is not as efficient as a wedge or metal coat hanger, but it could assist you in the event of a crisis.

Keep at peace and always put safety first. There are several options to deal with this issue. If you have read this article, you'll be prepared for any scenario that could occur. If you follow the steps we have provided, you will be in a position to unlock your vehicle and move going without causing unnecessary damage or stress. If you're able, take your keys along when you leave your car.

Shoelace

It's one of those "oh crap!" moments that can cause a lot of trouble. It's a good idea to have a few things that you can use to unlock your car without breaking any windows. Some of these items are readily available and will help you save money on a locksmith or the time required for roadside assistance.

A shoelace or twine can be used to unlock a car. It is simple to use and works on many different vehicles. This method only works for cars with post locks. They stack vertically on the window sill and are easily accessible from outside of the vehicle. Make use of a shoelace and the slip knot to get the job done. Then, wiggle the shoelace into the crack between door and window frame. Once the slip knot has been set and secured, pull both ends the string upwards in order to lasso the lock.

This technique may only work on older models with an open a car lock with a hook. A screwdriver, if it's available, can help open the door in a slightly more aggressive way. You can also use a pole that you can take from a nearby item, such as the door frame, or a piece of wood, to put into the window frame. This will allow space for an object to push the locking button.

Although the above strategies are safe for the majority of drivers, it's advisable to get help if possible. This will stop any further damage to the vehicle and it will also reduce the risk of an accident resulting from the stress of the situation. If you don't have a phone or aren't able for assistance, remember that it's important to inform trusted friends and family members know where your car is parked at all times. A spare set of keys should be kept in a safe spot on your vehicle.

Wire Hanger

It is a frustrating situation to lock your keys in your car. The trick is to remain at peace and think through all your options logically. You will not make the situation worse if you do not get caught up in panic.

You can use a modified wire hanger for entry into your car. You'll need to uncoil the coat hanger in order to create a straight edge with a hook that you can use to manipulate the lock rod. When you have reached the lock rod you should be able to pull it up to open the door.

You can also make use of rods, or metal pieces from your vehicle lockout service; link webpage,. It is crucial to make sure you don't cause harm to the vehicle during this procedure and it is ideal to do this without taking the car apart. It is also important to be as patient as possible since this method is likely to be more effective on older vehicles than it does on modern ones, however it can still be used when you own a car that has a unique exterior door handle design.

You can perform the same thing with the use of a shoestring tied into the slip knot. This can also be done on a post lock but it will be a bit more difficult to use since you'll be relying on the tension of the string to grab the lock. You can accomplish this by threading a shoestring into the tiny hole in the weatherstripping that is on your vehicle's doors. After the shoestring has passed through the weatherstripping, you can pull the string tight to form a tight loop that will snap around the lock. If you are lucky you will find the lock placed in the correct spot.