• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

It is important to clean and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home and even be fatal. It is essential to ensure that your windows are in good working order.

For single pane windows, it can be relatively simple to replace them, and the new window will generally fit within the old frame very easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the old panes. In this situation it is essential to purchase plastic spacers to make sure that the new pane fits into the window repair frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass yourself. It is also a good idea to lay down a dropcloth before you start working on the glass, so that any shards fall onto the fabric instead of onto the floor where they can be trampled upon and cause further damage.

Once the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block drafts and water from entering the property until a professional is able to come out and fix the window. It also acts as an obstruction to prevent criminals from getting into your home. If the gap between the window and the door is significant, you may want to use a security screen that also has an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. However, with time, they may be afflicted by a variety of problems including sliding. A sagging uPVC windows could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from getting worse.

Repositioning the hinges can aid in fixing a window which is sliding. You'll first need to open the windows so you can reach the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and check for fit. If you are happy with the fit of your window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loosen. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles can also loosen up. Often, this is caused by screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to close the window and then perform an initial fitting. The corner joints of the sash need to be aligned with the casing joint. If it isn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains, it is important that you take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or missing.

It is a fairly easy fix that can be completed by any DIY expert. Depending on the severity of the issue the old caulking might need to be removed before a new layer of caulk can be put on. It is crucial to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and can reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you may need to think about replacing the window repair.

Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sliding. A upvc Window Repair specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open, or if it opens with a breeze. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical part, hinges can wear out over time. It's very simple to change the hinges on a window but it's much easier if someone else helps hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. You can check this by checking for the arrows on each hinge. This indicates which way the window should open.

The problem can be caused by opening the window incorrectly or by a poor installation in the factory. This can often be resolved by sending us a photograph through our website and we will be happy to give you suggestions.

It is also crucial to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also lower the chance of windows getting stuck and stop corrosion. The ideal time to do this at least once a year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges may also become misaligned due to wear, causing an opening where the sash meets frame. They can be repaired by giving them thorough clean, however in the event that they are beyond repair it may be necessary to get them aligned or replaced. Secondly the interlock, this is located on the hinge of the window and can also be misaligned, and again it is possible to give them a good clean, but in certain cases, it may be necessary to have them replaced.

The next common cause of draughts is the window seals, these can become worn down or damaged over time, and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. These will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs windows made of upvc will provide excellent insulation and security for your home. It is crucial to realize that all windows have a lifespan and they may reach the point when it's more economical to replace them than fix them. If you are experiencing issues with your upvc window it is recommended to speak with a professional as soon as possible.