• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Replacement UPVC Door Handles

You can find the perfect handle for your door, whether you are replacing your handles or adding extra security. Upvc handles are simple to install and meet the required 92mm centres of multipoint locks.

The most important measurements to be considered are the backplate fixing centers and lever/key hole dimensions. Check these measurements against your current marks before ordering.

Lever/Pad

Lever pad handles for doors consist of an elongated lever handle on one side and a paddle shaped handle on the other. They are designed to be used with key wind locks however, they can also be used to multipoint split spindle door locks (though you'll require a separate dual spindle lock case).

Once you have chosen the right handle for your doors, the available finishes will be shown in the drop-down list. Some styles of handles are not available in all finishes. It is recommended to examine the technical drawing and dimensions sections for the particular item you are looking to ensure that you receive the right fit and size.

When you are choosing the new set of upvc lever pad door handles it is crucial to make sure that they are in line with the PZ (distance between the handle spindle and the centre of the cylinder hole) of your existing multipoint locks, as they need to be in the same line to allow doors to remain locked, whether from the inside or outside. The handles we sell are designed to work with the majority of standard cylinder locks, but you should always double-check before making a purchase.

If you are looking to upgrade to dual spindle levers you'll need to remove the handles that are currently in use and then disassemble the lock case. This will require an extra split cylinder inline. You can purchase these separately. We have included a technical illustration in the images of each product.

After you have removed the screws that hold the handle on your door, it is an ideal idea to loosen them and inspect the mechanism to see the condition it is in. If the screws are too tight then you might need to loosen them more. Then you can remove the spindle from the door handle and replace it with your new Upvc handle. It is essential to ensure that the handle is in the right position before screwing it into place. You can do this by placing your finger between the door frame and the handle to ensure that it's in the right position.

Lever/Lever

Lever door handles are a multi point lock using an Euro cylinder and can be found on a majority of upvc double glazing window handles doors, aluminium doors and some wooden doors. They are available in two types, with the lever inside and a paddle on the outside. Sprung - These have a spring cassette fitted inside the backplate to move the handle lever to the horizontal position. Non-sprung: These do not include a mechanism that can spring the handle lever to a horizontal position.

To repair the door handle lever that is sliding, you'll need to find the detent access pin or hole. It's usually small, protruding ring, or rectangle, that is located on the base of the handle plate. Once you have located the detent access hole or pin, you are able to remove it with a screwdriver.

When the handle is in a horizontal position, you can re-install the screws and tighten them to make sure the handle remains fixed to the base plate. It is also advisable to apply an adhesive that locks the threads of the screw to increase the grip and stop them from becoming loose over time.

Drooping lever door handles can be caused by many factors. The most frequent cause is that the fixings are too tight which causes the lever bearing to bind against the door. It could also be because the levers aren't operated in a straight line and this is causing compression of the latch mechanism preventing it from fully springing back into service.

Another reason is that the lever that is sprung is not working properly. This is usually due to the spring not being in the proper position within the backplate. To determine if the handle returns to its horizontal position, simply turn it.

It is essential to fix any door handles that are loose as soon as you can. This could lead to excessive wear on the screws, and the handle may even fall off the base plate. You should also tighten loose screws frequently to prevent them from becoming looser.

Lever/Snib

These upvc door handles are also referred to as 'Snib' handle sets and have a snib lever on the top of the lever that you can press down to lock your door in the event that you don't have an fake lock. They usually come with a Fullex 68PZ (that's 68mm between the spindle centre and lever or lock centre) door lock. We also carry a selection of other 68PZ door handles from various manufacturers, including Ferco and Fab & Fix.

The replacement upvc window handles of your door handle is an inexpensive method to upgrade your home, regardless of whether you're replacing your handles or installing new ones on doors you've built in your house. There are various styles available for upvc door handles, including the traditional lever on backplate. Other options include straight or curly short latches, and knobs that resemble dummy knobs to lock multi-points. These are great for French doors.

Rose door handles are oval or circular versions of lever on backplate handles. These handles for bi-fold doors handle are identified by a lever or knob that is attached to the backplate. The backplate can be removed for concealed fixing.

The handles are available in a variety of finishes, including coloured and chrome finishes to match your door and other hardware like knobs, hinges and bolts. Some handles are equipped with a an grub screw that can be used to connect the knob or lever securely to the spindle. Other handles are supplied with bathroom spindles that can be used to operate bathroom locks. They incorporate a thumbturn turn and release mechanism, perfect for bathroom doors.

Mortise

The tubular latch is most likely to be the culprit in the event that your door handle is stuck open. It could be due to many things however the most frequent is a lack of lubrication in the latch plate. It is possible to fix this issue by opening the door and spraying lubricant on the lock and handle. It could also be that the latch has come loose from the backplate. This could be more of a problem and requires a professional to fix.

A multipoint handle is the ideal solution for stuck door handles. These handles are attached to the faceplate and are operated by either a thumb turn or key knob that activates the cam that locks the deadbolt. The handles come in different sizes to suit different kinds of uPVC door and in a variety of attractive finishes that match existing hardware. These handles can be purchased via the internet or at the local locksmith. They are easy to install and come with clear directions.

You'll need to know the cylinder's PZ size in order to choose the correct replacement handle set. This is the distance from the edge of the inner frame of the door to the central point of the hole for the handle in millimetres. It is also important to be aware of whether your door has hook locks or a mortise lock. The easiest way to find the right handles after you have the measurements is to use the filter for brands on the website. This will help you narrow down your options and then you'll be able to select the right size.

A typical handle set comprises an arm comprising two screws of different lengths, drill guides, and installation instructions. The smarter models, such as the Igloohome Smart Mortise 2+ includes an entire mortice lock that has a built-in keypad. These are more complex devices that are for professional installers or highly competent DIYers. Some handle sets come with various accessories, like weather strips that can be used to improve the appearance of the door.