• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft with the audi rs3 ghost installer Immobiliser. This system is discrete and does not require any additional key fobs.

The device utilizes buttons in your vehicle (steering wheel, door panels & centre console) to create a unique changeable pin code sequence that can be up to 20 presses long. This will then authorize the startup of your vehicle.

Simple change of PIN code

Many homeowners are upgrading their security due to the rising number of vehicle thefts. There are a variety of aftermarket security devices available including tracking systems, immobilisers and alarms. Not all of them are equally effective in protecting your car. While a tracking device can assist in finding your vehicle in the event of theft, it will not stop the crime from happening in the first place. Immobilisers, on the contrary are exactly what they state on the tin: they disable your car's motor to prevent it from being started. The autowatch ghost installer Ghost is one of the most advanced options available, making it almost impossible for thieves to steal your car.

The ghost device uses the buttons on your car to create a unique sequence that must be entered in order for the engine to start. This can be done by using the heater, window or indicator stalk buttons. Additionally, there is also an app for mobile devices that can function as an emergency PIN code bypass and allow the driver to operate the car without having to use the button sequence. This feature is particularly beneficial if you have to give your car away for valet parking or maintenance, as the immobiliser is activated and not disabled.

The Ghost is a unique and innovative device that is used in conjunction with the buttons of your car rather than being a standalone unit. It's not just an effective deterrent to vehicle theft however, it can also be used on any future vehicles you may own. This makes it a better investment than a traditional wheel lock.

Small, weatherproof device

The autowatch ghost 2 immobiliser ghost 2 immobiliser installation Immobiliser is a high-tech security system that safeguards your pride & joy from key cloning and hacking. It also stops ECU swapping. It's a small, weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be placed in the vehicle without the need for additional wiring and has been thoroughly tested to ensure that it is compatible with all vehicles. It also is resistant to jamming devices that are an approach used frequently by thieves to get around existing immobilisers.

The advantage of CAN data over traditional systems is that they operate silently. It can't be detected by sophisticated RF scanning or code-grabbing technology and is also unrecognizable by conventional diagnostic tools. The Autowatch ghost doesn't produce LED indicators and instead uses the buttons in your vehicle like the steering wheel, centre console or door panels to create a unique, customizable disarm sequence. You can even make this sequence as long as 20 presses for added security. The iPhone app allows only one, authenticated connection with the pairing code unique to the Ghost and communication between the two is secured.

The Ghost will stop car thieves from putting in an ignition key replacement or replacing the ECU in order to bypass the immobiliser. The engine will only start only if a valid PIN has been entered. It is possible to operate temporarily in valet or service mode (with parameters set such as 30mph speed limit) and, therefore, you can hand your car to an attendant or valet without having to enter the code.

Tested for each vehicle

The autowatch ghost installers nottingham ghost 2 immobiliser review (click to read) is the world's first aftermarket immobiliser on the CAN bus that is able to be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device detects electronic signals that block your car's system from going through its normal startup routine until you input a custom passcode. The system can be turned on or off by using your smartphone app, without the need for additional wires.

Standard factory immobilisers on vehicles work by having a transponder built into the key that sends a signal to the ECU. The car will start if the correct code is transmitted. However, if a transponder from another vehicle is used instead, the immobiliser won't recognize it. This allows the vehicle be stolen and started. A South African company that is at the forefront of vehicle safety systems technology created the Ghost immobiliser. It protects you from hacking or key cloning, and even key theft. The only way thieves could take your car is by physically towing it away and even then, they wouldn't be capable of driving it.

Ghost makes use of the buttons on your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to create an unique, changeable PIN code sequence that must be entered before you can drive. This is done without any additional hardware, like key fobs. It can take up to 20 presses. It is also undetectable to diagnostic equipment and doesn't transmit radio frequency signals so thieves are not able to use sophisticated RF scanning or code grabbing technology to discover that the security system has been installed.

In contrast to the physical devices that prevent theft, such as clamps or wheel locks, Ghost is hidden within the vehicle, so it cannot be taken away or disabled by thieves. It is more difficult to remove than a car alarm that requires disarming using a button sequence. This makes it an excellent alternative to an GPS tracking device that can be used to locate your vehicle after it's stolen.

Override of emergency PIN code

You do not have to look long on social media sites to find stories or videos about cars that were stolen using the most advanced technology tools. This includes key-cloning devices as well as hacking tools that allow them to start the car without the original keys.

Our Ghost immobiliser fights this issue and offers an additional layer of security to prevent your vehicle from being taken if it is targeted by thieves. It is created by creating an unique pin code push sequence from your buttons on the steering wheel, door panel, and centre console. This unique PIN must be entered together with your original key fob in order to stop the vehicle from starting. The unique PIN for override is on the black card you will receive following installation. It's easy to remember since there aren't any LEDs.

The device is hidden in the wiring of the vehicle and doesn't emit radio signals. Therefore, it cannot be detected using diagnostic software which can identify the security system you have installed. This makes it a fantastic alternative to an electronic device for tracking.

Contrary to most security systems, which have an engine relay bay, these CANBUS Immobilisers connect with the car's ECU and BCM via CAN data bus (brand dependant). This allows them to shut down the vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect an analogue immobiliser, alarm or tracker with these systems, but this has to be stated prior to the installation of the device. They are also fully service/valet mode compatible and are a great alternative to a tracker when you have your car checked for repairs to an electrical issue at the dealer.

Service/Valet Mode

In recent years, there has been an increase in vehicles being stolen from owners without keys. With the ease of access to key cloning equipment and door lock pick sets, it is now much easier for thieves to take your joy and pride. We have developed the Autowatch Ghost Immobiliser to combat this. It stops your vehicle from being driven even if your keys have been copied.

It directly communicates with your car's ECU (Engine Control Unit), via the data loop of CAN. It's completely silent since it doesn't use radio frequency or a key fob. This means it cannot be detected by diagnostics or other vehicle hacking devices. It also shields against the possibility of adding a new key or replacing the ECU to get around the system, since only the correct PIN code will allow the engine to start.

The device is hidden inside your car by using buttons on the steering wheel, centre console and door panels. A unique and reversible PIN code sequence up to 20 digits must be entered prior to being able to start your vehicle.

This is the very first aftermarket CAN bus immobiliser that has been designed. It can prevent your vehicle from being started or driven when you don't enter a PIN code before entering. If you're driving away with the device in motion it will display an indicator on your dashboard that will flash continuously for around 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to run normally. If you do not enter your PIN in this moment, the indicator will continue to flash and will require a new PIN code each time you attempt to start your car.