• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Ghost Immobiliser 2

Secures your vehicle from key cloning & stopping thieves driving it with your original keys. Our latest immobiliser is connected to your vehicle's data network, CAN, and an individual PIN code has to be entered for the engine to begin.

Unlike trackers Ghost does not transmit any radio frequency signals and can't be detected with diagnostic tools. There are also no indicators in the form of LEDs or buttons that give away its presence within your vehicle or van.

Anti-key cloning

The ghost immobiliser was designed to stop key cloning and hacking. This device is connected to your vehicle's data network CAN and creates a unique pin code using the factory buttons on your dashboard and steering. This prevents the thief from being able to start your car. If the wrong PIN code is entered, the engine cannot be started and it will be impossible for them to drive away with your joy and pride.

A ghost immobiliser is a new technology that is extremely hard for thieves to beat. The ghost immobiliser unlike physical deterrents, such as wheel locks and steering locks that are able to be cut, is a discreet electronic device. It isn't detected by thieves because it does not emit radio signals and functions in a quiet manner.

The next-generation immobiliser protects your car from a variety of threats, including key hacking relay attacks, key-hacking, and duplicate copies. It can also prevent thieves from adding an additional key or replacing your ECU in the sense that it will not allow them to start your car without entering the correct PIN code first.

In contrast to other immobilisers the ghost immobiliser 2 does NOT require any additional key fobs or remotes in order to operate. It is deactivable through an app on the driver's smartphone. This is ideal the time you have to give your car to valet parking, or servicing without the key fobs.

The Autowatch Ghost-II represents the latest version of the bmw m4 ghost installer's immobiliser. It was designed to be as easy and user-friendly as it is possible, while remaining as secure as ever. This is achieved by integrating the ghost car immobiliser-II with the vehicle's CAN data network, which means there are no wires that can be hidden or easily discovered. It also comes with an inbuilt feature that lets you to disable your Ghost-II by connecting to the vehicle's Bluetooth and you'll be able to go out and drive with no hassle.

OBD port hacking

OBD port hacking has become the latest technique used by professional car thieves. Thieves can access your vehicle's OBD port with no more than an laptop, an app and a few cables that can be bought online for less than PS50. Once they have access to your vehicle's OBD port, they are able to do whatever they want from changing fault codes and tuning your car to taking away your pride and joy in under a minute.

It will protect your car from being taken away by requiring a unique PIN number to be entered along with your key fob prior to you can start the engine or leave. It communicates with the vehicle's ECU (Engine Control Unit) via the CAN Data Circuit. This is completely undetectable by any scanning technology, RF or code grabbing. It comes with a Service/Valet mode that allows your vehicle to start without the PIN code.

To make use of an OBD hacking device, you'll require an operating system that is capable of reading the OBD protocol. These can be bought for less than PS100 on eBay or Amazon. You'll also require a cable with OBD pins that are connected to the CAN bus, these are available on eBay and Amazon for around PS50. The cable needs to be connected to the wiring harness of your car, such as the radio wiring harness.

Once the hacker has established a connection to your vehicle's OBD port, they will send diagnostics to the system at a high baud rate which can cause CAN to crash and block systems in your car from functioning. This can cause your car's engine to stall or stop working.

No additional remotes or key fobs required

The car immobiliser is a great piece of anti-theft technology used by billions modern vehicles across the globe. Using engine ECU software to prevent vehicles from beginning if a false transponder signal is transmitted to it an aftermarket immobiliser can be an excellent way to safeguard your vehicle.

However, it can be easy for thieves to bypass an immobiliser system in the event that they have access the code to deactivate it. The batteries in the majority of key fobs is easily removed by removing it and a burglar can make use of a simple tool to take out the immobiliser's circuit board and replace it with a blank. They will then be able to start your vehicle.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes needed. The immobiliser communicates directly with the vehicle's ECU (Engine Control Unit). This is accomplished through a discrete, silent data loop in CAN that cannot be detected by diagnostic tools like those used by high-tech thieves. It doesn't include a traditional keyfob, which has an LED indicator, so it is invisible.

You may have to turn off Autowatch's Ghost 2 automatic protection at certain times, such as during valet parking or a service job. The ghost CAN immobiliser has a special mode for this, called 'Service Mode that can be activated with pressing a button on your smartphone. The car is still operable however, the maximum speed is limited to 36 mph.

If you'd like to know more about the TASSA accredited ghost immobiliser, contact us today to arrange a demonstration at our workshop. A member of our team will explain the process, and give you your Ghost 2 emergency card, installation certificate, and security assurance.

Simple process to change the PIN code

Ghost is a new generation device that secures your vehicle without cutting wires or putting in aftermarket key fobs. It connects directly to the vehicle's CAN data network. A personalised PIN is programmed using buttons on the dash and steering wheel. The system stops engine start and can't be bypassed as no RF signals are emitted from the device. This makes it unrecognisable by sophisticated scans using RF or code-grabbing techniques that modern thieves employ.

The PIN code is able to be changed to block previous drivers, or even add an override code in case you forget the sequence. The installer will guide you through the process to do this during installation. The system includes a valet mode feature that allows you to temporarily disable pin input sequences so that your mechanic or garage can service the vehicle without knowing the code. This is ideal for customers who want to give their car for valet parking / service but still don't want to divulge the pin sequence.

In contrast to Thatcham products that require additional key-fobs in order to operate, range rover evoque ghost installer is a discreet system that makes use of the buttons in your vehicle to create a unique interchangeable PIN code sequence. This sequence is entered via the app on your smartphone. No extra LED indicators are thrown, and your vehicle will be protected without any risk of being disabled.

Tested for every vehicle

A ghost immobiliser, unlike key fobs that require you to press buttons, is discretely installed under the dash or on the steering wheel. It is not obvious that it's there. The device is connected to the vehicle's CAN data network, and the personalised PIN code is programmed using existing buttons on your vehicle. The system then prevents your engine from starting unless this code has been entered before. This means that thieves cannot duplicate your keys or access the OBD port to hack your vehicle.

Ghost is a great option for all vehicles that use electric vehicles motorhomes, vans, motorhomes and bikes. ghost ii immobiliser is also extremely flexible and can be programmed to turn off in various situations. It can be programmed to go into Valet mode, for example, when the vehicle is taken to a valet service or parking company. This allows you to drive within a speed limit of 30 mph, and the ghost immobiliser will start to activate itself when the vehicle returns to your possession.

Another fantastic feature is that the device can be reset to your personalised PIN code at any time. This is useful if you forget the code or the device ceases to function and is as good as new again.

It's also worth noting that the device is completely undetectable to anyone who isn't familiar with it. It works by running through the buttons on the dashboard of your car and on the steering wheel, and utilizes the information they send to identify the buttons that have been activated. This makes it a completely secure and reliable security system that isn't affected by jamming, RF scanning, or door lock pick sets.